DeVilbiss

DVFR-3 Filter Regulator

* Dual filtration provides air filtered to 20 microns.
* Air flow of 60 cfm (1698 l/min).
* Two ball valve controlled outlets.
* Ideal for general workshop or prep deck duty.
* Semi automatic filter drain.

DeVilbiss

DVFR-2 Filter Regulator Coalescer

* High air flows for conventional and compliant spray guns.
* Provides air filtered to 0.01 microns suitable for air-fed respiratory outfits.
* Airflow of 50 cfm (1415 l/min).
* Suitable for use in booth/oven up to 100?C (212?F).
* Three ball valve controlled outlets.
* Rolling Diaphragm gives rapid response and sensitive air pressure control.

DeVilbiss

DVFR-8 Filter Regulator Coalescer with Activated Carbon Filter

* High air flows for conventional and compliant spray guns.
* Provides air filtered to 0.01 microns suitable for air-fed respiratory outfits.
* Activated carbon filter removes oil carry over to 0.003 ppm.
* Airflow of 42 cfm (1200 l/min).
* Suitable for use in booth/oven up to 100?C (212?F).
* Three ball valve controlled outlets.
* Rolling Diapgragm gives rapid response and sensitive air pressure control.

DeVilbiss

Dgi-501-BAR Dgi Digital Gauge

* The most accurate digital gauge available.
* Clear and easy to read, just squeeze the trigger to set.
* Smooth, accurate control even when wearing gloves.

DeVilbiss

HAV-501-B In-Line Air Adjusting Valve

* Fits neatly in-line at the gun air inlet.
* Increase or decrease working pressure at the gun.
* Calibrated up to 11 Bar (160 psi).

DeVilbiss

HAF-507-K12 In-Line Air Filters

* Lightweight gun mounting air filters
* High efficiency action traps water, oil and dirt.
* Tough solvent resistant Delrin housing with 1/4" threads.

DeVilbiss

Gti Pro Advanced Technology Spray Gun

DeVilbiss has introduced the GTi Pro, a totally new development in spray gun technology, delivering a uniform paint application with a consistently high-quality finish. The new GTi Pro may look like its GTi predecessor, but every single component has been replaced for optimum performance, and all aspects, from ergonomics through control and ease of cleaning, have been addressed and improved. Among notable mechanical function improvements is the "spool" design air valve, which now graduates the feed of air through the gun, making fade-outs and blend-ins infinitely more controllable and precise. Airflow through the gun has been smoothed and the fluid tips have been internally and externally re-profiled to significantly increase the fluid flows and make the same tip size suitable for a greater variance in viscosities. For the sprayer, this means simpler working practises with fewer set-up changes. GTi Pro guns are supplied clearly marked as either "BASE" or "CLEAR" to make the sprayer's life easier by differentiating their duties and avoiding mix-ups in gun Washers.