Spray Guns |
|
GTI-G-110-B-14
GTi GRAVITY FEED TRANS-TECH
TRANS-TECH TOP AND CLEARCOAT GRAVITY GUN
The GTi spray gun has been developed to take refinishers into the next millennium. It provides superb performance with all refinish primer and paint systems, plus assured compliance with EPA legislation. Developed using the world's most advanced techniques in computational fluid dynamics, the GTi has become recognised for setting the atomisation, lay down and colour matching standards for compliant spray guns. The GTi will handle waterbased, high, medium and low solids plus conventional materials.
- First class atomisation and material distribution.
- Reduced overspray and significant material savings.
- Trans-Tech compliant technology (No.110 air cap).
- Transfer efficiency comfortably in excess of the EPA specified 65%
- Tough, corrosion resistant blue anodised gun body.
- Accurate repeatable settings from datum markers on controls.
- Lightweight parts to reduce operator fatigue.
- Wide choice of fluid tips to suit materials and preferred flow rate.
- Modular components for easier, faster servicing.
| SPECIFICATION |
|
| Air Inlet Pressure |
2.0 bar (29psi) |
| Air Consumption |
269 l/min (9.5 cfm) |
| Air Inlet Thread |
1/4" Universal |
| Cup Capacity |
560 mls |
| Weight (gun & cup) |
760 gms |
| Air Cap & Ring |
Plated Brass |
| Fluid Tip |
Stainless Steel |
| Fluid Needle |
Stainless Steel |
|
 |
|
| Air Filter Regulators |
|
ADVANCED AIR MANAGEMENT
DVFR-3 FILTER REGULATOR
- Dual filtration provides air filtered to 20 microns.
- Air flow of 60 cfm (1698 l/min).
- Two ball valve controlled outlets.
- Ideal for general workshop or prep deck duty.
- Semi automatic filter drain.
| SPECIFICATIONS |
|
| Air Inlet Thread |
1/2" BSP (F) |
| Regulated Outlets |
2 Valved |
| Unregulated Outlets |
NA |
| Air Outlets (Ball Valve) |
1/4" BSP (M) |
| Width (overall) |
165mm (6.5") |
| Height (overall) |
240mm (9.5") |
| Weight |
1341 gms (46oz) |
| Capacity (max. air flow) |
1698 l/min (60cfm) |
| Max. Air Inlet Pressure |
13 bar (189 psi) |
| Max. Regulated Outlet Pressure |
0-8 bar (0-116psi) |
| Max. Operating Temperature |
40ºC (104ºF) |
| Pressure Gauge |
0-11 bar (0-160 psi) |
| Gauge Port |
1/8" BSP (F) |
| Air Filtration |
Down to 20 microns |
| Drain Valve |
Semi-Automatic |
| Maximum Pressure Drop |
5% of Inlet Pressure |
|  |
|
|
DVFR-2 FILTER REGULATOR COALESCER
- High air flows for conventional and compliant spray guns.
- Provides air filtered to 0.01 microns suitable for air-fed respiratory outfits.
- Airflow of 50 cfm (1415 l/min).
- Suitable for use in booth/oven up to 100ºC (212ºF).
- Three ball valve controlled outlets.
- Rolling Diapgragm gives rapid response and sensitive air pressure control.
| SPECIFICATIONS |
|
| Air Inlet Thread |
1/2" BSP (F) |
| Regulated Outlets |
3 Valved |
| Unregulated Outlets |
NA |
| Air Outlets (Ball Valve) |
1/4" BSP (M) |
| Width (overall) |
240mm (9.5") |
| Height (overall) |
280mm (11") |
| Weight |
3200 gms (113oz) |
| Capacity (max. air flow) |
1415 l/min (50cfm) |
| Max. Air Inlet Pressure |
13 bar (189 psi) |
| Max. Regulated Outlet Pressure |
0-8 bar (0-116psi) |
| Max. Operating Temperature |
100ºC (212ºF) |
| Pressure Gauge |
0-11 bar (0-160 psi) |
| Gauge Port |
1/8" BSP (F) |
| Air Filtration |
Down to 0.01 microns |
| Drain Valve |
Semi-Automatic |
| Maximum Pressure Drop |
10% of Inlet Pressure |
|  |
|
|
DVFR-8 FILTER REGULATOR COALESCER
- High air flows for conventional and compliant spray guns.
- Provides air filtered to 0.01 microns suitable for air-fed respiratory outfits.
- Activated carbon filter removes oil carry over to 0.003 ppm.
- Airflow of 42 cfm (1200 l/min).
- Suitable for use in booth/oven up to 100ºC (212ºF).
- Three ball valve controlled outlets.
- Rolling Diapgragm gives rapid response and sensitive air pressure control.
| SPECIFICATIONS |
|
| Air Inlet Thread |
1/2" BSP (F) |
| Regulated Outlets |
3 Valved |
| Unregulated Outlets |
NA |
| Air Outlets (Ball Valve) |
1/4" BSP (M) |
| Width (overall) |
305mm (12") |
| Height (overall) |
280mm (11") |
| Weight |
3300 gms |
| Capacity (max. air flow) |
1200 l/min (42cfm) |
| Max. Air Inlet Pressure |
13 bar (189 psi) |
| Max. Regulated Outlet Pressure |
0-8 bar (0-116psi) |
| Max. Operating Temperature |
100ºC (212ºF) |
| Pressure Gauge |
0-11 bar (0-160 psi) |
| Gauge Port |
1/8" BSP (F) |
| Air Filtration |
Down to 0.01 microns |
| Drain Valve |
Semi-Automatic |
| Maximum Pressure Drop |
10% of Inlet Pressure |
|  |
|
| Accessories/Consumables |
|
Dgi-501-BAR Dgi Digital Gauge
- The most accurate digital gauge available.
- Clear and easy to read, just squeeze the trigger to set.
- Smooth, accurate control even when wearing gloves.
|  |
|
|
HAV-501-B In-Line Air Adjusting Valve
- Fits neatly in-line at the gun air inlet.
- Increase or decrease working pressure at the gun.
- Calibrated up to 11 Bar (160 psi).
|  |
|
|
HAF-507-K12 In-Line Air Filters
- Lightweight gun mounting air filters
- High efficiency action traps water, oil and dirt.
- Tough solvent resistant Delrin housing with 1/4" threads.
|  |
|
